Overview
Epoxy grout is made from two-part epoxy resins which are then mixed with filler powder. Bathrooms and kitchens, in particular, can look really drab and dingy when the grout begins to flake or discolor, or when mildew or mold sets in. Epoxy grout has significantly greater bond strength and compression strength over cementitious grouts. It is also very stain resistant. Because epoxy hardens quickly epoxy grout can be difficult to apply and this often discourages people from using it. Epoxy grout is frequently used in commercial and industrial applications. The epoxy sets up fast and doesn’t have as much adjustability nor as forgiving as a cementitious grout. Installers who are new to installing epoxy grout without a lot of practice tend to struggle with the installation.
Products Features
● Porcelain wall tiles sealing
● Bathroom & kitchen mildew caulking
● Background wall decoration
● Bathtub, shower room, glass partition,sanitary ware
Specification
Brand Name: CHNGOO
Color: Transparent ,white, black, Grey, and other colors as request
Main Raw Material: Silicone
Application for: Indoor & Outdoor decoration
OEM or ODM: Yes
Package: 24pcs/CTN
Certificate: MSDS
Shelf life: 12 Months
Place of Origin:Guangdong, China (Mainland)
Package
Packaging Details
300ml/cartridge: 24 cartridges/carton; 1900 cartons/20' container without pallets; 1600 cartons with pallets
590ml/sausage: 1100 cartons/20' container
200L/drum: 75 drums/20'container
Preparation Stage
Ensure all the provided materials that bonding surfaces are clean and dry, Chngoo Epoxy grout has excellent unprimed adhesion to most substrates. Please confirm and test before buying the silicone sealant, make sure it is available for your using materials. If there is any doubt about contamination, surfaces should be solvent wiped with oil-free solvents, such as xylol, toluol, naphtha or non-flammable chlorinated solvents. Do not solvent-wipe with oil-based solvents such as Varsol. (Details please confirmed with sales)
Product Limitation
Be attention the following situations are not require for using:
1. Hide and semi-hide Glass curtain wall structural adhesive.
2. The grease, plasticizer or solvent surfaces.
3. The bad-ventilated places because it is required to absorb moisture in air to cure for the sealant.
4. Frosty or moist surface.
5. Continually soggy or humid place.
6. Surface temperature of materials under 4°C (39.2℉) or above 40°C (104℉).
7. Copper plated mirror, because it will be corrosive slightly on copper plating material.
No. |
Test Items |
Standard Regulation |
Test Result |
Assessment |
||
1 |
Appearance |
No clumps, gels, crusts, and precipitates that are not easy to disperse quickly and evenly. |
No clumps, gels, crusts, and precipitates that are not easy to disperse quickly and evenly. |
qualified |
||
2 |
Density,g/cm³ |
Specified value ±0.1 |
1.5 |
/ |
||
3 |
Crowd Out,mL/min |
≥50 |
265 |
qualified |
||
4 |
Tack-Free,h |
≤72 |
0.7 |
qualified |
||
5 |
Sag,mm |
vertical |
≤2 |
0 |
qualified |
|
Level |
0 |
qualified |
||||
6 |
Tensile bonding property, MPa |
M |
≤0.6 |
0.59 |
qualified |
|
G |
0.59 |
qualified |
||||
7 |
Elongation after hot air-water cycle |
M |
25% |
Non-destructive |
qualified |
|
G |
Non-destructive |
qualified |
||||
8 |
Elongation after water-ultraviolet irradiation |
25% |
Non-destructive |
qualified |
||
9 |
Low temperature flexibility |
-10℃ |
No cracking, delamination and adhesion damage |
qualified |
||
10 |
Elastic recovery rate after hot air-water cycle,% |
M |
≥5 |
94 |
qualified |
|
G |
98 |
qualified |
||||
11 |
Tensile Compression Cycle Performance |
M |
Durability rating |
7010,7005 |
7010 |
qualified |
Bonding failure area % |
≤25 |
0 |
||||
G |
Durability rating |
7010, 7005 |
7010 |
qualified |
||
Bonding failure area % |
≤25 |
0 |
Test Report
No. |
Test Items |
Standard Regulation |
Test Result |
Assessment |
||
1 |
Appearance |
No clumps, gels, crusts, and precipitates that are not easy to disperse quickly and evenly |
No clumps, gels, crusts, and precipitates that are not easy to disperse quickly and evenly |
qualified |
||
2 |
Density,g/cm³ |
Specified value ±0.1 |
1.5 |
/ |
||
3 |
Crowd Out,mL/min |
≥50 |
265 |
qualified |
||
4 |
Tack-Free,h |
≤72 |
0.7 |
qualified |
||
5 |
Sag,mm |
vertical |
≤2 |
0 |
qualified |
|
Level |
0 |
qualified |
||||
6 |
Tensile bonding property, MPa |
M |
≤0.6 |
0.59 |
qualified |
|
G |
0.59 |
qualified |
||||
7 |
Elongation after hot air-water cycle |
M |
25% |
Non-destructive |
qualified |
|
G |
Non-destructive |
qualified |
||||
8 |
Elongation after water-ultraviolet irradiation |
25% |
Non-destructive |
qualified |
||
9 |
Low temperature flexibility |
-10℃ |
No cracking, delamination and adhesion damage |
qualified |
||
10 |
Elastic recovery rate after hot air-water cycle, % |
M |
≥5 |
94 |
qualified |
|
G |
98 |
qualified |
||||
11 |
Tensile Compression Cycle Performance |
M |
Durability rating |
7010,7005 |
7010 |
qualified |
Bonding failure area % |
≤25 |
0 |
||||
G |
Durability rating |
7010,7005 |
7010 |
qualified |
||
Bonding failure area % |
≤25 |
0 |
PRODUCT Description
Used For
Related Products
GP-130 Acetic Window & Door Silicone Sealant
Silicone sealants that meet the demands of automated window and door manufacturing in a variety of colors
OS-796 Neutral Window & Door Silicone Sealant
Ensure resilient, long-lasting joint strength in new or remedial applications with OS-796 neutral silicone sealant.
SJ-168 Neutral Transparent Glass Curtain Wall Silicone Sealant
Neutral-cure silicone sealant suitable for a wide range of glazing, weathersealing and professional trade applications.
SJ-268 Neutral Construction-Grade Silicone Structural Adhesive Sealant
Silicone Structural Adhesive Sealant SJ-268
High Strength Silicone Epoxy Grouting Adhesive
High-Performance Epoxy Grouting Adhesive For Commercial And Residential Tile Installations
CONTACT US
Foshan Chngoo Co., Ltd.
We are always providing our customers with reliable products and considerate services.
If you would like to keep touch with us directly, please go to contact us